Multilac


	Field of Application:			Properties:
	Macklite Emulsion Paint is recommended for interior applications on neutral wall surfaces.			Good colour retention. Faster drying. High solids. Good brushability.

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 60-65% by weight

	Flash point:			Vehicle:
	above 65 °C.			Styrene Acrylic Copolymer

	Degree of Gloss:			Colours:
	Matt			Refer to shade card.

	Storage:			Safety Advice:
	Store at room temperature between 10 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			1 litre, 4 litres,10 litres, containers & 200 litre drums.

Method of Application:
	Preferably by brush or roller.

Cleaning of tools:
	Brush and other tools must be cleaned with soap water immediately.

Covering Capacity:
	12-14 Sq.m / litre (depending on surface )

Drying time :
	20 minutes , can be recoated in 4 hours

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preperation depends on the available surface and it's condition and plastered surfaces must be allowed to dry and be cleaned properly. Lime containing plasters or materials should be neutral. If reacting alkaline, flush with sweet water till it becomes neutral.Multilac Acrylic Filler should be applied as an under coat on newly built walls.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.