Multilac


	Field of Application:			Properties:
	Micron Acrylic Wall Filler can be applied on interior and exterior walls as a primer coat.Also suitable for plaster, concrete, buildingboard, plywood surfaces etc.			Micron Acrylic Wall Filler covers and seals off pores and imperfections on the walls and provides an ideal surface for the applications of paint. An extremely smooth surface can be obtained by sanding. A cost effective barrier coat against alkaline substances, It improves the adhesion to the surfaces and protects the finish coat especially in changing in to a new colour.

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 60-65% by weight

	Flash point:			Vehicle:
	above 65 °C.			Special Acrylic-Emulsion.

	Degree of Gloss:			Colours:
	Matt			Refer to shade card.

	Storage:			Safety Advice:
	Store at room temperature between 10 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			1 litre, 4 litre,10 litre, 20 litre cans and 200 litre drums.

Method of Application:
	Preferably by brush or roller. Can also be sprayed.

Cleaning of tools:
	Brush and other tools must be cleaned with soap water immediately.

Covering Capacity:
	14-16 Sq.m / litre (depending on surface )

Drying time :
	20 minutes , can be recoated in 2-3 hours

Mixing :
	1 Part of Paint with 2 part of water by volume.

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preperation depends on the available surface and it's condition and plastered surfaces must be allowed to dry and be cleaned properly.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.