Multilac


	Field of Application:			Properties:
	Multilac Acrylic Wall Filler can be applied on interior and exterior walls as a primer coat.Also suitable for plaster, concrete, buildingboard, plywood surfaces etc.			Gives an excellent finish, making uneven surfaces even and smooth. A cost effective barrier coat against alkaline substances, It improves the adhesion to the surfaces and protects the finish coat especially in lime plastered walls.One coat of Acrylic Filler will reduce the quantity of the paint required to finish the wall thus making the paint job very cost effective specially when changing in to a new colour.

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 60-65% by weight

	Flash point:			Vehicle:
	above 65°C .			Special Acrylic-Emulsion.

	Degree of Gloss:			Colours:
	Matt

	Storage:			Safety Advice:
	Store at room temperature between 10 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			1 litre, 4 litre,10 litre, 20 litre cans and 200 litre drums.

Method of Application:
	Preferably by brush or roller. Can also be sprayed.

Mixing :
	2 Part of Paint with 1 Part of Water

Cleaning of tools:
	Brush and other tools must be cleaned with soap water immediately.

Covering Capacity:
	14-16 Sq.m / litre (depending on surface )

Drying time :
	20 minutes , can be recoated in 2-3 hours

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preperation depends on the available surface and it's condition and plastered surfaces must be allowed to dry and be cleaned properly.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.