Multilac


	Field of Application:			Properties:
	Multilac Anticorrosive Paint can be used on all types of metal surfaces.			Protects metal surfaces from corrosion. It has extensive spreading and covering capabilities and give a smooth glossy finish.

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 55-60% by weight

	Flash point:			Vehicle:
	above 65 °C.			Combination of synthetic resins

	Degree of Gloss:			Colours:
	Min 30 at 20 °C angle			Available in Red,Gray,Green,Blue & Black

	Storage:			Safety Advice:
	Store at room temperature between 10 °C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water. Keep away from sources of ignition.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			200 ml, 500 ml, 1 litre and 4 litre tin cans and 200 litre drums.

Method of Application:
	Preferably by brush or roller. Can also be sprayed.

Mixing :


Cleaning of tools:
	Brush and other tools must be cleaned with mineral turpentine immediately.

Covering Capacity:
	16-18 Sq.m / litre (depending on surface )

Drying time :
	Touch dry- 1 hour Hard dry- 8 hours

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preperation depends on the available surface and it's condition.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.