Product Description
 
Field of Application:   Properties:
  Multilac Floor Paint can be applied on cement floors to obtain a lasting and decorative finish. Wax polish could be applied after about one week duration for a better finish. Also
recommended for old linoleum, wooden, stone floors etc.
    Multilac floor paint dries quickly thus
giving a lasting shine for interior floors.
Technical Data:   Solid-content:
  Basic characteristics at 20 °C :     approx. 55-65% by weight
Flash point:   Vehicle:
  above 65 °C.     Special synthetic resin
Degree of Gloss:   Colours:
  Min 30 at 20 °C angle     Refer to shade card.
Storage:   Safety Advice:
  Store at room temperature between
10 C- 48 °C
    Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.
Waste Removal:   Packaging:
  Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.     500ml, 1litre, 4 litres attractive
lithographic promotional cans and 200 litres drums.
   Application
Method of Application:
  Preferably by brush
Mixing :

 
Cleaning of tools:

Brush and other tools must be cleaned with white spirit immediately.
Covering Capacity:
  13-15 Sq.m / litre (depending on surface )
Drying time :
  Touch dry- 30 min
Hard dry - 7-8 hours
Suitable Surface and their Preparation
 

The surface must be dry, free from dust and other such separable substances that may
prevent good adhesion.

The type of surface-preperation depends on the available surface and it's condition.

   Advice
Technical Assistance:
  As it is imposible to list herein the widevariety of substrates and their specific problems, please request our technical assistance in case of queries.
Please Note:

All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.