Multilac


	Field of Application:			Properties:
	Multilac Road Marking Paint is used for marking on asphalt and concrete roads as well as for marking kerb stones, without the risk of asphalt bleeding through.			Multilac road marking paint is a modified chlorinated rubber based paint. It gives a hard wearing weather resistant semi gloss film.

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 35-40% by weight

	Flash point:			Vehicle:
	above 65 °C.			Special resin with modified chlorinated rubber

	Degree of Gloss:			Colours:
	Matt			Yellow, white, black, red

	Storage:			Safety Advice:
	Store at room temperature between 10 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			4 litre tin cans and 200 litres drums.

Method of Application:
	Preferably by brush or roller.


Cleaning of tools:
	Brush and other tools must be cleaned with synthetic thinner imediately.

Covering Capacity:
	9-12 Sq.m / litre (depending on surface )

Drying time :
	Touch dry - 30 min Hard dry - 8 hours

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preperation depends on the available surface and it's condition.

Technical Assistance:
	As it is imposible to list herein the widevariety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.