Multilac


	Field of Application:			Properties:
	Mainly use for refinish industry and could be applied on metal and wooden material where protection and aesthetic properties are required.			Nitrocellulose based quick drying Top coat clear lacquer is one pack product which is designed for top coat in Refinish and industrial sector, used as protective coat and gloss enhancer of total finish system. Special features are quick drying, good under coat protector while giving glossy surface. Suggested as protective coat for refinish auto industry and general industrial application on metal or wooden mainly on nitrocellulose paint system

	Technical Data:			Solid-content:
	Flash Point - 25-35 c Flash off time – 5 – 10 min Drying time – 5 – 10 min. Gloss at 20 – 65 - 75 Solid content –30 -40 % by weight Film Thickness – Approx. 10 -15 microns per coat Chemical Composition – Nitrocellulose, Alkyds, xylene and acetate			Solid content – 60-65 % by weight

	Flash point:			Vehicle:
	25-35 c

	Degree of Gloss:			Colours:


	Storage:			Safety Advice:
				Contain flammable solvent. There for keep away from fire work. Use protective equipments when handling the products. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:

Method of Application:
	Preferably by Spray. Reduced with Multilac Super Thinner at 1:1/ 2 ratio by volume

Cleaning of tools:


Covering Capacity:


Drying time :


Suitable Surface and their Preparation
	Before applying remove all dirt, oil and grease and make sure the surface is clean.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.