Multilac


	Field of Application:			Properties:
	Multilac Aqua Shield Water Proofing Emulsion is a high build, water base paint which forms a seamless, high elastic and durable film that adheres well to most of the common substrates such as concrete, cement and asbestos as an excellent water tight barrier.			Prevent hairline cracks Superior Water Proofing ability Environmental friendly

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 35-45% by weight

	Flash point:			Vehicle:
	above 90 °C.			Elastomeric Styren Acrylic Co-polymer.

	Degree of Gloss:			Specific gravity :
	Matt			approx. 1.3

	Storage:			Safety Advice:
	Store at room temperature between 5 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			1 litre , 4 litre attractive plastic cans

Dilution :
	1st coat : 3 parts of paint with 1 part of water 2nd coat : 4 parts of paint with 1 part of water 3rd coat : 4 parts of paint with 1 part of water

Method of Application:
	Preferably by brush or roller. Can also be sprayed.

Cleaning of tools:
	Brush and other tools must be cleaned with soap water immediately.

Covering Capacity:
	20-25 Sq.f / litre (depending on surface )

Drying time :
	Allow 4 hours intervals between each coats. Allow 72 hours before filling water

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.