Multilac


	Field of Application:			Properties:
	Multilac Weather Guard is a decorative and protective wall paint based on special acrylic copolymer for exterior use.It can be used on various types of dry surfaces such as walls, ceilings, concrete, buliding board, hard board, brick, wallpaper new or previously painted.			Provides excellent water, chemical & abrasion resistance. Excellent hiding power.Contains weather resistant light fast pigments with fungus and mould retarding additives to protect the surfaces for years.

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 50-55% by weight

	Flash point:			Vehicle:
	above 90 °C .			Special Acrylic Co-polymer.

	Degree of Gloss:			Colour :
	Min 8 at 85 °C angle			Refer to shade card.

	Specific gravity :			Storage:
	approx. 1.33 (depending on shade)			Store at room temperature between 5 C- 48 °C

	Safety Advice:			Waste Removal:
	Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.			Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.

	Packaging:
	1 litre and 4 litres attractive lithographed containers or plastic cans, 10 lts, 20 lts plastic container & 200 litre drums.

Method of Application:
	Preferably by brush or roller. Can also be sprayed.

Cleaning of tools:
	Brush and other tools must be cleaned with soap water immediately.

Covering Capacity:
	14-15 Sq.m / litre (depending on surface )

Drying time :
	Surface dry15 minutes, hard dry 30 minutes

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. In most instances, problems are faced by users, specifically in exterior paints, due to negligence in properly preparing the surface to be applied. It is very important that the surface must be cleansed of all mould growth and are free from algae. Plastered surfaces must be allowed to dry after proper cleansing. Plasters or material containing lime should be neutral and if reacting alkaline, should be flushed with sweet water until it becomes neutral. Multilac Acrylic Filler could be applied as an undercoat for a better finish.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.