Multilac


	Field of Application:			Properties:
	Multilac Supreme Life Exterior Wall Primer can be applied on exterior walls as a primer coat before applying the Multilac Supreme life Exterior Special Extra Durable Wall Paint. Also suitable for any masonry plaster, concrete, buildingboard, plywood surfaces etc.			Prevent hairline cracks and provide excellent water, chemical & abrasion resistance. Excellent hiding power. Improves the adhesion of top coats. Reduce the amount of top coats about 20%.

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 55-60% by weight

	Flash point:			Vehicle:
	above 90 °C.			Special Styren Acrylic Resin

	Degree of Gloss:			Colours:
	Matt			Refer to shade card.

	Storage:			Safety Advice:
	Store at room temperature between 5 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Diluent :			Specific gravity :
	Mineral Turpentine			approx. 1.5

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			1 litre , 4 litres, 10 litres and 20 litres attractive tins

Method of Application:
	Preferably by brush, roller or applicator trowel .Can also be sprayed.

Cleaning of tools:
	Brush and other tools must be cleaned with Minneral Turpantine mmediately.

Covering Capacity:
	8-9 Sq.m / litre (depending on surface )

Drying time :
	Surface dry15 minutes, hard dry 30 minutes. Allow 6 hours between coats.

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.