Multilac


	Field of Application:			Properties:
	Multilac Supreme Life Water Proofing Sealer is a solvent based, fast drying sealer which seals the porous surfaces while preventing water penetration through it. This can be applied on substrates such as concrete, cement and asbestos and acts as an excellent water tight barrier.			Prevent water leakages. Can apply on even damp areas. Environmental friendly

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 65-70% by weight

	Flash point:			Vehicle:
	above 65 °C.			Combination of synthetic resins

	Degree of Gloss:			Specific gravity :
	Matt			approx. 1.6

	Storage:			Safety Advice:
	Store at room temperature between 10 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			1 litre, 4 litres, attractve plastic cans

Dilution :
	Do not dilute product and apply as it is. Apply minimum two or more coats for better performances.

Method of Application:
	Preferably by brush or roller .

Cleaning of tools:
	Brush and other tools must be cleaned with mineral turpentine immediately.

Covering Capacity:
	40 -45 Sq.ft / litre (depending on surface )

Drying time :
	Allow 4 hours intervals between each coats. Allow 72 hours before filling water

Suitable Surface and their Preparation
	The surface must be dry, free from dust, oil, grease, dirt and other such separable substances that may prevent good adhesion.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.