Multilac


	Field of Application:			Properties:
	Micron P.U. Varnish is SLS certified and specially formulated for wood.			Gives a bright and glossy finish. Dries quickly.

	Technical Data:			Solid-content:
	Basic characteristics at 20°C:			approx. 40-45% by weight

	Flash point:			Vehicle:
	above 65 °C.			Special synthetic resin

	Degree of Gloss:			Colours:
	Min 60 at 20°C angle			Refer to shade card.

	Storage:			Safety Advice:
	Store at room temperature between 10°C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			200ml, 500ml, 1 litre, 4 litres cans and 200 litres drums.

Method of Application:
	Preferably by brush or roller. Can also be sprayed.

Cleaning of tools:
	Brush and other tools must be cleaned with soap water immediately.

Covering Capacity:
	15-18 Sq.m / litre (depending on surface )

Drying time :
	Touch dry - 20 min Hard dry - 5 hours

Suitable Surface and their Preparation
	The wooden surface must be dry, free from dust and other such separable substances that may prevent good adhesion. Apply Multilac Sanding Saeler as a primer coat for a better finish.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.