Multilac


	Field of Application:			Properties:
	Multilac Aluminium wood primer is recommended as an excellent filler and foundation for subsequent coats of undercoat enamel etc. on new wood.			Multilac Aluminium Wood Primer has been specially formulated to prevent penetration of top coats in to the cavities on wooden surfaces. Having excellent filling properties. It provides good foundation for subsequent top coats of enamel etc.

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 40-45% by weight

	Flash point:			Vehicle:
	above 65 °C .			Special Alkyd resin.

	Degree of Gloss:			Colours:
				Aluminium (grey)

	Storage:			Safety Advice:
	Store at room temperature between 10 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			200ml, 500ml, 1 litre, 4 litres tin cans and 200 litres drums.

Method of Application:
	Preferably by brush . Can also be sprayed.

Cleaning of tools:
	Brush and other tools must be cleaned with white spirit immediately.

Covering Capacity:
	15-16 Sq.m / litre (depending on surface )

Drying time :
	Touch dry- 30 min Hard dry -overnight

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preperation depends on the available surface and it's condition.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.