Multilac


	Field of Application:			Properties:
	Multilac Coach Finish Varnish is made specially for use on Coach work, Ceiling and where clarity of PU Varnish is not required.			Protect the wooden surface .

	Technical Data:			Solid-content:
	Basic characteristics at 20°C :			approx. 15-20% by weight

	Flash point:			Vehicle:
	above 65 °C.			Special synthetic resin

	Degree of Gloss:			Colours:
	Min 60 at 20°C angle

	Storage:			Safety Advice:
	Store at room temperature between 10 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			200ml, 500ml, 1 litre, 4 litres, cans and 200 litres drums.

Method of Application:
	Preferably by brush or roller. Can also be sprayed.

Cleaning of tools:
	Brush and other tools must be cleaned with soap water immediately.

Covering Capacity:
	15-18 Sq.m / litre (depending on surface )

Drying time :
	Touch dry - 2 hours Hard dry - 8 hours

Suitable Surface and their Preparation
	The wooden surface must be dry, free from dust and other such separable substances that may prevent good adhesion. Apply Multilac Sanding Saeler as a primer coat for a better finish.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.