Multilac


	Field of Application:			Properties:
	Multilac N.C. Primer is specially recommended for wood. It seals small pores and grooves on the surface thus providing protection from swelling by moisture absorption. It also fills uneven gaps giving a smooth finish to the surface.			Multilac N.C. Primer has been specially formulated to prevent penetration of top coats in to the cavities on wooden surfaces. Having excellent filling properties, It provides good foundation for subsequent top coats.

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C :			approx. 50-55% by weight

	Flash point:			Vehicle:
	above 65 °C .			Special Alkyd resin and N.C.

	Degree of Gloss:			Colours:
				White , Black, Red

	Storage:			Safety Advice:
	Store at room temperature between 10 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			500ml, 1 litre, 4 litres, tin cans

Method of Application:
	Preferably by spray. Can also be brushed.

Cleaning of tools:
	Brush and other tools must be cleaned with mineral turpentine immediately.

Covering Capacity:
	18-20 Sq.m / litre (depending on surface )

Drying time :
	Touch dry- 5 min Hard dry - 1 hours

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preperation depends on the available surface and it's condition.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.