Multilac


	Field of Application:			Properties:
	Multilac N.C. Wood Finish is used on all types of wooden furnitures and equipment as a top coating for lasting protection and attractive finish.			Multilac nitro-cellulose clear lacquer is an ample sturdy and scratch resistant lacquer which gives a good depth and a smooth and attractive surface.

	Technical Data:			Solid-content:
	Basic characteristics at 20 °C:			approx. 25% by weight

	Flash point:			Vehicle:
	above 65 °C.			Special Alkyd in Hydrocarbon solvents.

	Gloss level :			Colours:
	Available in Glossy, Satin & Matt finish.

	Storage:			Safety Advice:
	Store at room temperature between 10 C- 48 °C			Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.

	Waste Removal:			Packaging:
	Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities.Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.			200ml, 500ml, 1 and 4 litre cans. 200 litres drums.

Method of Application:
	By spray gun.

Cleaning of tools:
	Brush and other tools must be cleaned with n.c. thinner immediately.

Mixing ratio :
	1 part by volume n.c. clear lacquer 1 part by volume thinner-for brushing or 2 part by volume thinner- for spraying

Covering Capacity:
	8-15 Sq.m / litre (depending on the method of application )

Drying time :
	Touch dry 10-15 min Sanding dry- 1 hour Pilling dry- 2.5 hours

Suitable Surface and their Preparation
	The surface must be dry, free from dust and other such separable substances that may prevent good adhesion. The type of surface-preperation depends on the available surface and it's condition.

Technical Assistance:
	As it is imposible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.

Please Note:
	All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content.