|
Back to Technical Page | Back to the chinese Lacquer Page
|
|
MULTILAC CHINESE LACQUER
|
|
Multilac Chinese Lacquer is an alkyd based lacquer with very good gloss and flexibility. It can be used in both interior and exterior surfaces. It is easy to apply and levels well.
Field of Application: Multilac Chinese lacquer can be used on all types of surface, like metal, wood, concrete etc. with appropriate primers.
Main Use: Used for artistic works & small touch ups where the requirements are minimum.
|
|
|
|
DRYING
TIME
|
Surface dry 2 hours Hard dry 8 hours
|
|
|
|
THINNER
|
Multilac synthetic thinner or Multilac mineral turpentine (do not over-thin)
|
|
|
|
COVERING
CAPACITY
|
15-16 Sq.m/Litre (depending on the surface and film thickness)
|
|
|
|
SPECIFIC
GRAVITY
|
Approximately 1.30
|
|
|
|
SOLID
CONTENTS
|
Approximately 55-60% by weight
|
|
|
|
METHOD OF
APPLICATION
|
Preferably by brush, can also be sprayed
|
|
|
|
SHADES
|
Black, white, silver, blue, green, yellow & red are the direct colours (special colours on request)
|
|
|
|
CLEANING
|
Brushes and other tools should be cleaned immediately with turpentine
|
|
|
|
PACKING
|
50ml and 100ml tin cans. (12 tins packed in a box)
|
|
|
|
STORAGE
|
Store in cool and dry place.
|
|
|
|
DIRECTIONS
FOR USE
|
To be stirred well before use. Remove dirt, grease, oil and rust before painting and ensure that the surface is perfectly clean and dry.
|
|
|
|
SURFACE PERPARATION
|
Please refer to our separate detailed instructions on surface preparation and synthetic enamel, priming for solvent based.
|
|
Top of the page
Back to Technical Page | Back to the chinese Lacquer Page
HOME | OUR PROFILE | PRODUCTS | OUR PEOPLE | PHILOSOPHY | CONTACT US |