Welcome to Macksons Paint Industries Worldwide.

Back to Technical Page | Multilac Wether Gard Page

WETHER GARD

TOUGH EXTERIOR EMULSION PAINT
Weather Guard is a high quality exterior use wall paint based on styrene modified acrylic copolymer Emulsion resin. It gives a luxurious finish with a sheen which has excellent resistance to dirt pickup. It is easy to apply. Also it has very good washability. It contains weather resistant light fast pigments with fungus and mould retarding additives, to protect the wall applied for years.
It can be used outdoors on various types of dry surfaces such as walls bricks, hardboards, building boards, concrete, new or previously painted.

DRYING
TIME

Surface dry 15 minutes, Hard dry 30 minutes

THINNER

Clean water

DILUTION

COAT	PAINT	WATER
1ST	1 PART	1 PART
2ND	2 PART	1 PART

COVERING
CAPACITY

14 - 15 Sq.m / Litre (depending on surface)

SPECIFIC
GRAVITY

Approximately 1.33 (depending on shade)

SOLID
CONTENTS

50 - 55 % by weight (depending on shade)

METHOD OF
APPLICATIONP

Preferably by brush or roller. Can also be sprayed.

FLASH
POINT

Shades

SHADES

Refer our colour card. Additional colours as per customers specs can be supplied on request.

CLEANING

Brushes and other tools must be cleaned with water immediately.

PACKING

1 Litre and 4 Litres attractive lithographed cans and 200 Litres drums.

STORAGE

Store at room temperature between 20° C - 40° C.

DIRECTIONS
FOR USE

To be stirred well before use. The surface to be painted should be clean (wire-brush off fungus and mould, wash with fungicide solution or bleach, remove loose paint, rust and other residue with coarse sand paper or scraper) fill cracks and holes with Multilac acrylic wall filler.
The moisture content in the surface should not be more than 10 %.

SURFACE PERPARATION

Please refer to our separate detailed instructions on surface preparation and priming for water based paints.