|
Back to Technical Page | Back to the Multilac Enamel Page
|
|
THE HIGH BUILD GLOSS ENAMEL FROM THE IMAGE BUILDER
|
|
Multilac gloss enamel is a high quality general purpose alkyd based enamel with very good gloss and flexibility. It is meant for interior exterior application. It is easy to apply and levels well. Multilac gloss is considered to be the best gloss coating of international standard available in the market today at a highly competitive price.
|
|
|
|
DRYING
TIME
|
Surface dry in 2 hours. Hard dry in 8 hours.
|
|
|
|
THINNER
|
Mineral turpentine or synthetic thinner, when necessary do not over-thin.
|
|
|
|
COVERING
CAPACITY
|
15 - 16 Sq.m / Litre (depending on the surface)
|
|
|
|
SPECIFIC
GRAVITY
|
Approximately 1.30
|
|
|
|
SOLID
CONTENTS
|
55 - 60 % by weight (depending on shade)
|
|
|
|
METHOD OF
APPLICATION
|
Preferably by brush or roller can also be sprayed
|
|
|
|
FLASH
POINT
|
Non - flammable
|
|
|
|
SHADES
|
As per shade card and special colours on request.
|
|
|
|
CLEANING
|
Brushes and other tools should be cleaned immediately with turpentine.
|
|
|
|
PACKING
|
200 ml, 500 ml, 1 Litre, 4 Litres attractive lithographed cans and 200 Litres drums.
|
|
|
|
STORAGE
|
Store at room temperature between 20° C - 40° C.
|
|
|
|
DIRECTIONS
FOR USE
|
To be stirred well before use. Remove dirt, grease, oil and rust before painting and ensure that the surface is perfectly clean and dry.
|
|
|
|
SURFACE PERPARATION
|
To be stirred well before use. Remove dirt, grease, oil and rust before painting and ensure that the surface is perfectly clean and dry.
|
|
Top of the page
Back to Technical Page | Back to the Multilac Enamel Page
HOME | OUR PROFILE | PRODUCTS | OUR PEOPLE | PHILOSOPHY | CONTACT US |