|
Back to Technical Page | Back to the Ecolac Enamel Page
|
|
MICRON ECOLAC ENAMEL LOW COST ENAMEL
|
|
Miceon ecolac enamel is a low cost general purpose alkyd based enamel with good gloss and flexibility. lt is meant for interior and exteriors. lt os easy to apply and levels well. micron ecolac is specially manufactured for contractors and low budget consumers.
Field of Application -Micron ecolac enamel can be used on all types of meta l and wooden surfaces, also on walls, Ccncrete a well.
|
| ---- |
|
|
DRYING
TIME
|
Surface dry in 2 hours. Hard dry in 8 hours.
|
|
|
|
THINNER
|
Multilac mineral turpentine or multilac synthetic thinner, when necessaery do not overthin.
|
|
|
|
COVERING
CAPACITY
|
13 - 15Sq.m / Litre (depending on the surface)
|
|
|
|
SPECIFIC
GRAVITY
|
1.3
|
|
|
|
SOLID
CONTENTS
|
55 - 60 % by weight (depending on shade)
|
|
|
|
METHOD OF
APPLICATION
|
Preferably by brush or roller can also be sprayed
|
|
|
|
SHADES
|
As per shade card and special colours on request.
|
|
|
|
CLEANING
|
Brushes and other tools should be cleaned immediately with turpentine.
|
|
|
|
PACKING
|
200 ml, 500 ml, 1 Litre, 4 Litres attractive lithographed cans and 200 Litres drums.
|
|
|
|
STORAGE
|
Store at room temperature between 20° C - 40° C.
|
|
|
|
DIRECTIONS
FOR USE
|
To be stirred well before use. Remove dirt, grease, oil and rust before painting and ensure that the surface is perfectly clean and dry.
|
|
|
|
SURFACE PERPARATION
|
Please refer our sepaeate detailed instructions on surface Preparation and synthetic enamel, priming for solvent based paints.
|
|
Top of the page
Back to Technical Page | Back to the Ecolac Enamel Page
HOME | OUR PROFILE | PRODUCTS | OUR PEOPLE | PHILOSOPHY | CONTACT US
|