|
Back to Technical Page | Back to the Multilac Oil Primer Page
|
|
MULTILAC OIL PRIMER
|
|
Multilac oil primer is an anticorrosive and rust preventive primer based on synthetic resin. It is recommended to be used as the first coat on iron and steel to be followed by finishing enamel coats to give durability to the surface applied.
|
|
|
|
DRYING
TIME
|
Surface dry 1 hour. Hard dry 8 hours.
|
|
|
|
THINNER
|
Mineral Turpentine
|
|
|
|
COVERING
CAPACITY
|
10 - 12 Sq.m/litre (depending on the surface)
|
|
|
|
SPECIFIC
GRAVITY
|
Approximately 1.3
|
|
|
|
SOLID
CONTENTS
|
60 - 65 % by weight.
|
|
|
|
METHOD OF
APPLICATION
|
by Brush, Roller or Spray
|
|
|
|
SHADES
|
Red oxide
|
|
|
|
CLEANING
|
Brushes and other tools should be cleaned immediately after use with mineral turpentine.
|
|
|
|
PACKING
|
500ml, 1 Liter, 4 Litres tin cans and 200 Litres drums.
|
|
|
|
STORAGE
|
Store at room temperature between 20° C - 40° C.
|
|
|
|
DIRECTIONS
FOR USE
|
Remove dirt, oil and rust before painting by washing down / scraping to ensure that the surface is perfectly clean and dry.
|
|
|
|
SURFACE PERPARATION
|
Please refer to our separate detailed instructions on surface preparation and priming for solvent based paints.
|
|
Top of the page
Back to Technical Page | Back to the Multilac Oil Primer Page
HOME | OUR PROFILE | PRODUCTS | OUR PEOPLE | PHILOSOPHY | CONTACT US |