|
Back to Technical Page | Back to the Multilac Wood Primmer Page
|
|
MULTILAC ALUMINUM WOOD PRIMMER
|
|
Multilac Aluminium Primer is recommended for new wood. It has excellent filling properties and provides a good foundation for subsequent coats of undercoat / enamel etc. This product is specially formulated to prevent penetration of top coat in to the cavities of the wooden surfaces.
|
|
|
|
DRYING
TIME
|
Surface dry 2 - 3 hours. Hard dry overnight
|
|
|
|
THINNER
|
Multilac mineral turpentine may be added if required.
|
|
|
|
COVERING
CAPACITY
|
15 Sq. m/litre (depending on the surface.)
|
|
|
|
SPECIFIC
GRAVITY
|
Approximately 1.2
|
|
|
|
SOLID
CONTENTS
|
60 % by weight
|
|
|
|
METHOD OF
APPLICATION
|
Preferably by brush or spray
|
|
|
|
SHADES
|
Aluminium (dull)
|
|
|
|
CLEANING
|
Brushes and other tools should be cleaned immediately with white spirit.
|
|
|
|
PACKING
|
200ml, 500ml, 1Litre and 4Litres tin cans and 200 Litres drums
|
|
|
|
STORAGE
|
Store at room temperature between 20° C - 40° C.
|
|
|
|
DIRECTIONS
FOR USE
|
Ensure that the new wood surface is free of moisture, dust, and loose particles. The primer should be applied uniformly. Stir well before use. The primer should be allowed to dry overnight and dry sanded before applying subsequent coats.
|
|
|
|
SURFACE PERPARATION
|
Please refer to our separate instructions on surface preparation and priming for solvent based paints.
|
|
Top of the page
Back to Technical Page | Back to the Multilac Wood Primmer Page
HOME | OUR PROFILE | PRODUCTS | OUR PEOPLE | PHILOSOPHY | CONTACT US |